Kaufen Sie die neuesten Raspberry Pi Boards, den Raspberry Pi 4 und vieles mehr. Jahrelange Erfahrung und bester Kundenservice zeichnen Ihr Kauferlebnis bei Berrybase aus Raspberry Pi Komplet zum kleinen Preis hier bestellen. Große Auswahl an Raspberry Pi Komplet Pi - Samba Share mounten 1. Installation des SMB-Clients. Auf aktuellen Raspbian Versionen läuft der SMB-Client Dienst, welchen wir für den... 2. Erstellung eines sog. Mount-Points. In diesem Schritt erstellen Sie ein Verzeichnis, in welches Sie später die... 3. Manuelle Einbindung der NAS-Freigabe.. This page will explain how to use a subset of the Samba system to 'mount' a shared folder on a Windows device so it appears on your Raspberry Pi, or to share a folder on your Raspberry Pi so it can be accessed by a Windows client. Installing CIFS/Samba suppor
Lösung: Eintrag in der Datei /etc/fstab anlegen (Raspbian Wheezy) Jetzt geht es darum, die Partition bzw. das Dateiystem fest einem Mount-Point in der Datei /etc/fstab zuzuordnen. Dazu öffnen wir folgende Datei: sudo nano /etc/fstab. Folgende Zeilen eintragen: //192.168.1.2/SambaTest /home/pi/shares/test cifs. It's easy to use a Raspberry Pi as a Samba file server where you can store backups and share files from all the other computers on your network. Samba is the Linux implementation of the SMB/CIFS file sharing standard used by Windows PCs and Apple computers, and widely supported by media streamers, games consoles and mobile apps. With Samba activated you can quickly copy files from a computer on your network to a Raspberry using wireless LAN (or a direct Ethernet connection) Tested on Raspbian Buster on a Raspberry Pi 4 Over this past weekend, I finally setup a network share via Samba on my Raspberry Pi with an old external USB hard drive I had laying around. My RetroPie installation already serves up a Samba share - so my goal was to throw an additional folder in there that mounts to an external drive
if the samba share does not need any credentials to and you want to mount the share when you start your raspberry pi then edit the fstab file as root. sudo nano /etc/fstab and add the following line //server/share /mnt/abc cifs guest 0 0 close and save the changes to the fstab file. check that everything connects as it should wit . Alternativ kann der Client mit dem folgenden Befehl installiert werden: sudo apt-get update sudo apt-get install smbclient Der Netzwerkspeicher kann über den Mount-Befehl in ein beliebiges Verzeichnis gemountet werden. In dem Beispiel wird das Verzeichnis /mnt/smb verwendet 1. Create folder in the /mnt/ folder so that you can mount your network share in that folder $sudo mkdir mountfoldername. 2. Two Ways to access. 2.1 Guest Share sudo mount -t cifs -o guest //WindowsPC/share1 /mnt/mountfoldername. Tip: If your share has space then run the following command, notice the quote
Damit der User am Client auch Schreibrechte am Samba Server bekommt, musst Du im Mount-cifs auch die Option uid=/gid= setzen. Sonst wird per default die uid/gid des aufrufenden Users herangezogen und die ist uid=0, gid=0. Die Samba Server conf Variablen (u.A. %S) werden im Abschnitt Variable Substitutions in < man smb.conf > erklärt. Servus Samba-Freigabe auf dem Raspberry Pi einrichten; Samba-Freigaben und mit fstab automatisch mounten/einhängen; NFS-Freigaben mit autofs automatisch mounten/einhängen. Es muss nicht immer die Datei /etc/fstab sein. Das Tool autofs ist ein Automounter. NFS-Server auf dem Raspberry Pi einrichten; NFS-Freigabe mounten/einhänge In this guide, you will learn how to install and configure a Samba share on your Raspberry Pi to share files with other devices (and presumably other operating systems) on your local network. This is an extremely useful and one of the easiest ways to share files locally, whether it be for storage, backup, or media to consume. A Samba share is usually a critical piece to any Network Attached. This article covers how to transfer and access remote files on a Raspberry Pi using Samba. Step 1. Get to the command line. Remote to the Raspberry Pi over ssh or open up a terminal window via the desktop. Step 2. Get the latest updates. Get the latest updates by running this command Today, we're going to set up Samba file sharing in the Raspberry Pi to manage folders and files from another computer. You can also mount a hard drive to the Pi and set it up as a Network-attached storage, (NAS) so you can share data with all or some devices connected to your network
We're going to create a dedicated samba share directory. 1. sudo mkdir -m 1777 /SambaShare. To permanently mount data to /SambaShare dir, add this line to fstab. 1. 2. sudo nano /etc/fstab. /SpinData /SambaShare none bind 0 0. Edit Samba config file to make the dir visible to the Windows and Linux PCs on the network sudo mount -t cifs -o username=<USERNAME>,password=<PASSWORD>,vers=1.0 //<RESERVED IP>/homes/admin/GoogleDrive /home/pi/pictures/. If that worked, then you can add an entry to your fstab, which will cause this drive to be ready to go every time the PI boots. But first remove the mount: sudo umount /home/pi/pictures Configuring Samba on Raspberry Pi, to share USB drives Posted on 3 stycznia, 2018 by bartb Today it is time to use Samba for USB Drives sharing
Create a folder on your Raspberry Pi to mount the drive in. I mounted mine at /home/pi/ DRIVE / share To do this, type these commands in your terminal (change 'DRIVE' and 'share' to whatever you want) cd /home/pi sudo mkdir DRIVE cd DRIVE sudo mkdir share cd. raspberry-pi samba. Share. Improve this question. Follow edited Mar 30 '17 at 23:02. Stephen Rauch. 3,728 14 14 gold badges 18 18 silver badges 32 32 bronze badges. asked Mar 30 '17 at 19:47. s55michi s55michi. 51 1 1 silver badge 3 3 bronze badges. 1. You can't do that - as has already been pointed out, authentication is done on a per-host basis rather than a per-user basis. It might be worth. Mounting A Windows Share As A Raspberry Pi Directory At Boot Time. If you need to set up a permanent mount to a Windows share, you'll need to create an entry for it in your Pi's fstab.If you have not created a share on your Windows system, follow the steps here.. At the Pi command line, create a mount point in /mnt that will be connected to your PC Mounting the share on a windows machine. Moment of truth time! Open file explorer and type in the following: \\Hostname or IP of Raspberry PI\Share Name\ For me, it was: \\192.168..105\master\ I am trying to mount a samba share that is in a Raspberry Pi running OpenWrt to a directory on another Pi (running OSMC/Kodi) in the same LAN. I am running this command from the Terminal of a Pi running OSMC (Kodi): smbclient \\\\openwrt\\4TB2 -U root. It prompts for my password and lets me list the files in the 4TB2 share
In this Raspberry Pi Samba tutorial, we will be showing you how you can share directories from your Raspberry Pi using the SMB/CIFS protocols. Samba is a re-implementation of the SMB (Server Message Block) networking protocol and allows Linux computers to integrate into Microsoft's active directory environments seamlessly [PiShare] comment=Raspberry Pi Share path=/home/pi/share browseable=Yes writeable=Yes only guest=no create mask=0777 directory mask=0777 public=no. Notice how we tell Samba that public access is not allowed via public=no - this means that anyone wanting to access the shared folder must with a valid user. In this case the valid user is the user called pi. To let Samba know.
It's easy to use a Raspberry Pi as a Samba file server where you can store backups and share files from all the other computers on your network. Samba is the Linux implementation of the SMB/CIFS file-sharing standard used by Windows PCs and Apple computers, and widely supported by media streamers, games consoles, and mobile apps Now let's switch gears to our Raspberry Pi. We will be mounting the Windows share to a directory on our Raspberry Pi. We will need to install cifs-utils. This will help us mount SMB directories- which is what we get from Windows
Jetzt Setzen Sie die Freigabe für das mount-Point Verzeichnis mit folgenden Befehlen. Sambapi ist in diesem Fall ihr Nutzername und muss sowohl im Raspberry Pi als auch in der Samba-Datenbank gleich sein If you want a network share that guest users can easily connect to, Samba is better suited to the task. This is because tools to temporarily mount and detach from Samba shares are more readily available across old and proprietary operating systems. Before deploying an NFS, you should be familiar with: Linux file and directory permission One thing to make sure of though - ensure that your NAS will always come up under that same ip address or your system won't be able to mount it - and you'll be rsyncing your home directory into your /mnt/share/homedir on your local system Linux system can also browse and mount SMB shares. In this article I am going to explain how you can mount SAMBA file system (SMBFS) permanently in Linux.Please note that this can be done whether the server is a Windows machine or a Samba server The How. Part 1: Get your Raspberry Pi up and running. This is covered in great detail by people who know a lot more than me elsewhere, and some searching will take you far. If you get lost, here.
Ich möchte kurz beschreiben, wie man einen Ordner aus einem NAS-System im Raspberry Pi mounted. Ich wollte mit meinem Pi regelmäßige Backups einiger Ordner durchführen und diese Ordner in regelmäßigen Intervallen, gepackt auf meinem NAS speichern. Das Einbinden des NAS ist wirklich einfach gemacht. Zuerst erstellen wir den Ordner, in dem der NAS Inhalt verlinkt sein soll. Z.B: cd mkdir. Festplatte für Freigabe einrichten. Öffnen Sie den Datei-Explorer (Dieser PC) und klicken mit der rechten Maustaste auf die Festplatte oder das Laufwerk, das Sie freigeben möchten.Wählen Sie jetzt Eigenschaften und klicken auf den Reiter Freigabe (1).; Jetzt klicken Sie auf erweiterte Freigabe und setzen einen Haken bei Diesen Ordner freigeben (2) Auto-mount Samba / CIFS shares via fstab on Linux posted in Linux on January 30, 2018 by Tim Lehr I've been a happy Linux user for quite a while now, but even I cannot deny that it's sometimes quite hard to get things running smoothly - especially in a Windows dominated environment with little control
What would be the best approach to solve this issue? As @Frap suggested, use systemd units to manage the mount and the service and the dependencies between them.. This document discusses how you could set up a Samba mount as a systemd unit. Under Raspbian, it should look something like: [Unit] Description=Mount Share at boot After=network-online.target Before=docker.service RequiredBy=docker. Raspberry Pi. Julien 11 July 2015 I have USB hard drives that I've added in fstab that mount in /mnt, but samba auto-shares them so it won't let me create another share with guest access. It's further complicated because it auto-shares using the label name of the HDD. My library on other PC's use that label name, so I'd either need to (a) mount the hard drive under a different.
A networked Raspberry Pi can also make use of this storage to, for example, make use of its space or to have access to its files. 5 steps in mounting a shared NAS folder to a Raspberry Pi will go through the process using NFS (Linux Network File System). This is an ongoing post. Please suggest corrections, explanations, etc. in the comment. raspberry pi ordner freigeben. Die Installation der Software ist einfach - melden Sie sich bei Ihrem Raspberry Pi an und führen Sie sie aus: sudo apt-get install samba samba samba-common-bin. Nach der Installation konfigurieren Sie die Software, indem Sie die Datei /etc/samba/smb.conf mit dem Befehl öffnen: sudo nano /etc/samba/smb.con Find code and diagrams at: https://www.EliTheComputerGuy.co
.conf file and add the following lines. These lines define the behaviour of the shared folder so you can call them share definition First, we need to ensure the cifs-utils package is installed so we can connect to an SMB share. It's probably already installed. Still, it doesn't hurt to run the command to confirm its presence. sudo apt-get install cifs-utils -y. We can shrink the network backup images so they don't consume a tonne of disk space on the server. Additionally, they will be able to be restored to SD cards.
Mounting the Disk from Another Raspberry Pi. You can go ahead and mount the NFS volume from another Raspberry Pi, or any other Linux machine, as follows, $ sudo mkdir /mnt/nfs $ sudo chown -R pi:pi /mnt/nfs $ sudo mount 192.168.1.225:/mnt/usb /mnt/nfs. where 192.168.1.225 was the IP address of the first Raspberry Pi serving the disk I'm fairly new to volumio so I'm trying to figure thing out. This is how I managed to mount a disk shared from OS X using SMB/CIFS. OS and Hardware. Mac Os X 10.10 Yosemite on an iMac mid 2010 sharing the drive I wanted to access. Volumio 1.55 on a Raspberry Pi 2 B; Working mount flags: sec=ntlmssp ro,sec=ntlmssp. Non working mount flags Menu Samba Server on Raspberry Pi with Docker 20 June 2020 on Storage, Docker, Samba. In this tutorial we will create a samba server on the raspberry pi using docker. Samba is a file sharing service that allows windows clients to transfer files to and from, but not limited to windows, as linux clients can use cifs to interact with samba to access the shares Create the mount point for your NFS share, this is the local virtual folder you will use to access the folder on the NFS server. sudo mkdir -p /mnt/nfs. Change permission of the NFS mount point to pi. sudo chown -R pi:pi /mnt/nfs. Test mounting the NFS share path on your Raspberry Pi. Replace the first section with the IP address of your NFS.
Once you do that, you're ready to access your shares! Connecting to the Raspberry Pi Samba Server. Your Raspbery Pi NAS based on Samba is now up and running. To connect to it you only need to open a file explorer on your computer and browse the network. You'll see your Raspberry Pi and its shared folder waiting to be accessed! If for some reason the Pi isn't showing up enter \\your_pi_ip. This is achieved using the 'mount' command. Your Raspberry Pi already has a number of 'drives' mounted, as you can see using the mount command on it's own: mount. Which will list (at least) the following: /dev/root on / type ext4 (rw,noatime,data=ordered) devtmpfs on /dev type devtmpfs (rw,relatime,size=437904k,nr_inodes=109476,mode=755) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size.
Post your smb.conf before you make any changes, post a screenshot of your shares in the Samba Server Config tool. Then post the changes that you made with the tool that shows that they are working. Also make sure you go in and remove the ; in the Browseable line for the share. You can check for windows shares in Windows cmd with net view should show all computers on your network. My Computers. comment=Raspberry Pi Share path=/home/pi/share browseable=Yes writeable=Yes only guest=no create mask=0777 directory mask=0777 public=no. Exit and Save the file. Since we tell the Samba server that public access is not allowed, it means that to access the shared folder you have to have a valid user
. sudo apt install samba samba-common-bin. Then, edit the configuration file using the nano text editor. sudo nano /etc/samba/smb.conf . You can limit the connections to your NAS by adding authentication. In the Samba configuration file, press CTRL + W and search for Authentication. ##### Authentication ##### Now, add the line. Mount Auto-Mount Drives Raspberry PiIn this video, we are going to show you how you can Mount and Auto-Mount the External drives on Raspberry Pi .Website : h..
There are so may post on different forums talking about accessing Synology Shared Folder from Raspberry PI but none seem to talk on the point. Follow these steps and you should be able to access your Synology NAS volume. Step 1: Set NFS Permissions Set NFS permissions in your NAS: Continue Reading How to Mount Synology NAS Volume in Raspberry PI / Fedora / Ubunt So I have a Raspberry Pi 3 with two powered external USB hard drives mounted in /shares. SAMBA is up to share the mounted drives across network. My Windows PCs can see and access the drives fine. I have an Android TV box that lets me mount the Raspberry Pi but says that the /shares folder is empty and cannot see the mounted USB drives. Android. comment=Raspberry Pi Share path=/home/pi/pi-share browseable=Yes writeable=Yes only guest=no create mask=0777 directory mask=0777 public=no. Die letzte Zeile schauen wir uns dabei noch einmal genauer an. Der Standardwert no führt dazu, daß nur angemeldete Benutzer auf unseren neu erzeugten Netzwerkspeicher zugreifen können. Genauer gesagt sind dies Benutzer, die auf eurem Raspberry Pi. Mounting a Windows 10 shared folder to my Raspberry Pi Helpdesk So I am not very well versed in Linux but I'm having a good time learning and doing my best to figure things out but after a few hours of tinkering I'm at a loss on this one Einmalig mounten am Raspberry Pi (Raspbian & OpenELEC) Um einmalig die Freigabe mit eurem Raspberry Pi zu verbinden könnt ihr folgenden Befehl verwenden, auch hier muss der Name eurer Festplatte sowie Benutzer und Passwort natürlich angepasst werden. Falls ihr nicht die Standardkonfiguration der FritzBox verwendet natürlich auch noch die IP-Adresse. Danach könnt ihr via /media/fritzbox-usb.
. Im folgenden Beispiel verwenden wir den Benutzer pi. Diesem Benutzer müssen Sie nun die Rechte für den freigegeben Order mit sudo chown -R pi:pi /media/WD250/samba zuweisen. In diesem Beispiel wollen wir später den Ordner /media/WD250/samba freigeben. Jetzt müssen Sie nocheinmal mit sudo nano /etc/samba/smb.conf. Auf einen Desktop auf unserem Pi haben wir ja zugunsten der Hochfahrzeit verzichtet. Für unsere weiteren Projekte werden wir Shell-Scripts (-sh) und Python-Programme (.py) erstellen wollen. Diese Textdateien kann man jetzt natürlich über den Raspbian-internen Editor nano erstellen, aber so richtig Spaß macht das nicht. Da wir ja sowieso vor unserem Windows-PC sitzen und den Raspi über SSH.
When trying to mount a Samba share on my Archlinux host, I receive the following error: mount error: cifs filesystem not supported by the system mount error(19): No such device Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Now, some back story... My laptop runs Archlinux and I am trying to connect to a Samba share on my Raspberry Pi (running Archlinux ARM). Here is the Raspberry. Last year I described a simple method of automounting a directory from my windows server to my Raspberry Pi. Since then I've gone down a couple of paths to simplify rebuilding my Raspberry Pi machines. The method I used last year required modifying the /etc/hosts file, the /etc/fstab file, pre-creating the mount points, and creating a credentials file to store the windows credentials In part one of our tutorial, we discussed how to mount an external hard drive or USB drive on to our Raspberry Pi (or any other Linux based) computer. In this tutorial we will discuss how to share folders from that computer to your local network. I am doing this so I can share the media files I have on my external hard drive, and access them from many places on my network, such as my laptop.
The extension Filesystem Mount gives you the possibility to access external network shares and set up your own network path as a Samba Share. Whether you want to connect an external harddrive via USB, set it up to be accessed through the network by others or provide your Squeezebox Server with other sources for media files; this extension makes it possible with a few entries Here's how to create a file share with Samba. Create a File Share. This allows you to access your Raspberry Pi files from your desktop machine. Run Update sudo apt update && sudo apt full-upgrade -y Install Samba. Open Terminal and run the following: sudo apt install -y samba Configure Samba sudo nano /etc/samba/smb.conf Configure Network Nam Raspberry Pi Samba Server installieren: Dateien im lokalen Netzwerk teilen I mmer mehr Daten werden in Clouds gespeichert. Das hat den Vorteil, dass die Dateien von überall erreichbar sind. Allerdings werden diese meist bei einem Online-Dienst gespeichert und nicht jeder möchte das A Raspberry Pi; A mounted, USB hard drive with space for the stuff you want to share Mine is the second hard drive partition, mounted at /mnt/data; Install Samba. The Samba package creates network file shares in a way that Mac, Windows, and other Linux computers on the network will understand. Install Samba as follows
NET SHARE On Raspberry Pi. Create a mount point where you would like the Windows files to appear: sudo mkdir /WINDOWS Now mount the shared directory so it appears on the Pi: sudo mount -t cifs -o username=username,password=password //WINDOWS_IP_ADDRESS/share-name /WINDOWS You can also use the Windows machine name rather than its IP address Having a Raspberry Pi on a network is great when browsing the internet or updating software, but sometimes the need to copy files and folders would be handy, now Windows offers Folder sharing making this very easy amongst themselves, but for those new to the Linux world this can be too daunting. For years the Linux world has always had SAMBA to help remove the barriers between Linux and. Make sure you have cifs-utils installed on the Pi and then use something like the following in fstab: //192.168.1.x/windows_shared_folder /home/pi cifs guest,iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0. or specifying a user: //192.168.1.x/windows_shared_folder /home/pi cifs credentials=/home/pi/
I have an rclone mount set up and working perfectly on my Raspberry Pi and I also have a Plex media server on the same device. I'm considering moving the Plex server onto my Shield Pro and accessing the rclone mount as a samba share (if possible) but I'm struggling to get it working. I must confess I'm not the most linux savvy person out there, but I usually get there with the help of some. How to mount your network drive on your Raspberry PI? Create a new folder, for instance: /home/pi/mynetworkdrive; Edit the /etc/fstab file: sudo nano /etc/fstab; Add the following line: //192.168.1.xxx /home/pi/mynetworkdrive cifs guest,_netdev 0 0 (replace 192.168.1.xxx with the actual IP-address of your network drive) Mount the new drive How to mount your network drive on your raspberry pi. To do this type these commands in your terminal change drive and share to whatever you want. Click menu button select preferences select raspberry pi configuration in the system tab there is an option called network at boot check the wait for network box click ok
I have a peculiar Samba share issue. I was running Windows 7 on my laptop. I have a file server running Linux and Samba. When I open the Network icon in Windows 7, I see my server there and I can open it and access the associated folder shares. I upgraded to Windows 10. Now if I double click the network icon, I don't see any machines except my local client laptop. However, if I enter the UNC path to my samba server (\\myserver) into the path bar of Windows Explorer, I can access. In order to configure a network share folder on your Raspberry Pi. Raspberry Pi 3 Model B+; RJ45 connection cable; Broadband Router; Network switch; TP-LINK AV2000 Powerline Adapter Kit, 2-Port, What is Samba Samba is an Open Source/Free Software suite that provides seamless file and print services to SMB/CIFS clients. Samba is freely. To mount such shares you have to explict set the SMB protocol version to 1 by add the option vers=1.0 to the Options line in the mount unit sudo mkdir /home/shares/public/disk1 sudo chown -R root:users /home/shares/public/disk1 sudo chmod -R ug=rwx,o=rx /home/shares/public/disk1 The name of the folder (disk1 in the example) does not matter, put the one you want to be able to find it easily on the network. Once done, mount the device in this folder
It can even on a mounted external hard drive. For this tutorial, we will be creating a public and private folder that will be accessible on the NAS: mkdir /home/pi/shared. Step 4: Sharing folder using Samba . Next, we will be sharing the above folder using Samba. To do this, you will have to modify the Samba configuration file. Key in the following command to edit the file: sudo nano /etc. Mount a USB Drive to the Raspberry Pi Automatically. In the latest version of Raspbian (Stretch), your USB drives should be automatically mounted when it is connected to the Pi. It is important to know if you do upgrade to Stretch from Jessie there might be compatibility problems with older projects & tutorials Set up Samba on Raspberry Pi 2 B Wheezy. GitHub Gist: instantly share code, notes, and snippets When setting up samba sharing on the Raspberry Pi, here is what I added to my smb.conf file: Before mounting: sudo usermod -a -G pi plex sudo chown pi:pi /disks/plex1 sudo chown pi:pi /disks/plex2 And after mounting: sudo chown -R pi:pi /disks/plex1 sudo chown -R pi:pi /disks/plex2 User pi should now have full access to the disks as should user plex, but virtue of being a member of group. You can configure your Raspberry Pi to auto-mount it on boot. The /etc/fstab file /etc/fstab is a configuration file to configure a mount point for each device. We'll save in this file all information needed to mount our USB drive to /mnt/usb. Follow this procedure to add your USB drive in this file: Open /etc/fstab: sudo nano /etc/fstab ; Add this line at the end: UUID=2014-3D52 /mnt/usb.
Now, you have to connect your Windows SMB share to the Raspberry Pi. We do this by editing the FSTAB file, which allows the share to be mounted on boot. Firstly, create your folders in your media folder. Do so by executing the following: sudo mkdir media/share/ Your Windows shared folders will then appear i Preparing for and Mounting the External Hard Drives . Once you have gathered up the hardware, followed along with the Getting Started with Raspberry Pi tutorial to get up to speed (and are running Raspian) it's time to start setting up your Pi as a NAS. The first order of business is to hook up the hard drives to the Raspberry Pi (or the attached USB hub depending on your configuration and. My Test Samba Server could manage a data volume of more than 30 TB by using a Raspberry Pi 4 Modell B ( ca .62 €) or Raspberry Pi 3 Model B (ca 41 €). All my family members are happy as they.
The Common Internet File System (CIFS) is a network file-sharing protocol. CIFS is a form of SMB. In this tutorial, we will explain how to manually and automatically mount Windows shares on Linux systems. Installing CIFS Utilities Packages # To mount a Windows share on a Linux system, first you need to install the CIFS utilities package. Installing CIFS utilities on Ubuntu and Debian: sudo apt. Eine einfache Samba Freigabe kann im lokalen Netzwerk ein nützlicher Ablageort sein, um gemeinsam Dateien zu teilen. Dieser Artikel zeigt wie Sie anhand eines Debian 8 basierten Systems eine öffentliche Samba Freigabe erstellen. Als Client-Software zum Testen der Verbindung wird Ubuntu 16.04 sowie Windows 10 eingesetzt
I did not want this as the share will be called after the user name (in my setup 'pi') and some clients (Mac OS X) will auto-mount this under the share name (/Volumes/pi). If I have a second Raspberry Pi and I use the same setup, then the home directory for user 'pi' on that Raspberry Pi will be mounted as /Volumes/pi-1. The problem with this is that the assignment of the names is not stored. In this article, we're going to be walking you through how to both set up OpenMediaVault on your Raspberry Pi, as well as configure an SMB share to run from the Pi. To start, first download the .iso for the Pi from the OpenMediaVault SourceForge page. Format the SD card, then write the image to it. Once the image is written, you're ready to set-up your server Introduction. Samba is a key component for our Raspberry Pi setup. In simple terms, it allows us to access the Pi (a Linux environment based on Debian and oterhs) from a Windows machine. It allows us to share things like Printers, and much more The Raspberry Pi is a great device with many possibilities and one such great use is as a NAS server for your LAN.. The Raspberry Pi by itself is limited by the space it can offer so you will need to add a USB SATA storage device like the Thermaltake BlacX attached to the Pi with a drive size of your preference, my own is a 1TB drive with NTFS shared to Windows OS and MAC OS systems for access If you want a network-attached storage device but aren't ready to invest in one, make one with a spare Raspberry Pi. Here's how to turn a simple board into the brains of a NAS for file sharing